By removing impurities such as dirt, leaves, grass, hair, body oils, sunscreen, and even many bacteria from the water, our high efficiency filters keep your pool water clean, clear and inviting.

Choose from two different filter technologies— cartridge, or  D.E.



Click For More Info

Our cartridge filters proven design uses special filter elements to strip particles from pool water with great effectiveness. Maintenance? Open the top. Remove the cartridge. Hose it off. What could be simpler? Crystal Clear Water the Easy Way The Clean & Clear Plus filter combines top-end filter performance with low maintenance. This dependable design uses special filter elements to strip tiny particles from your pool water…particles as small as 20 microns (an average grain of beach sand is 1,000 microns). Our four-cartridge design provides maximum filter surface area to capture more dirt and extend time between cleanings. And cleaning is a snap—open the top, remove the cartridges, hose them off and the Clean & Clear Plus filter is ready to go again. We’ve maximized cartridge surface consistency to block and trap the maximum amount of solids, plus we use the most durable materials to extend cartridge life. The Clean & Clear Plus filter delivers commercial-grade performance that keeps pools clean and sparkling, day in and day out.

• Four-cartridge design traps more dirt and extends time between cleanings.

• Cartridges are easy to remove and rinse.

• Clamp ring allows easier access to cartridges and internal parts to speed service routines.

• 1½” drain is easy to access and located to ensure complete draining during winterization.

• Fiberglass-reinforced polypropylene tank is strong and corrosion resistant for extra long life.



Click Here For Info

Diatomaceous earth, or D.E. for short, is a natural substance that traps dirt and debris as small as five microns (1/10 the width of a human hair). That means body oils, suntan lotions, pollens, dust and even some bacteria are caught in a D.E. filter, leaving behind sparkling clear, healthier water. We’ve maximized the filtration area, which means longer periods between cleanings. And we’ve designed our D.E. filters to require the least amount of pumping power to achieve a needed flow rate, lowering your utility costs.

Filtering with diatomaceous earth (D.E.) gives you water that really sparkles. That’s because D.E. filters remove the tiniest of contaminants…particles as small as 5 microns (an average grain of sand is 1,000 microns!). Even though these particles can’t be seen individually, collectively they greatly affect water clarity. Here’s why diatomaceous earth filters work so well. Water passes through a series of D.E. coated grids. Under a microscope, D.E. looks like a collection of tiny sponges. And just like a sponge, water can pass through, but microscopic impurities like dirt, algae and some forms of bacteria can’t. FNS Plus filters have been designed with curved grids to maximize filtration area.

More filter area means better performance and longer periods between cleanings. Our internal design has been refined to minimize flow restrictions, and therefore requires minimal pumping power to achieve a needed flow rate. That means lower utility costs. In addition to providing the clearest water possible, FNS Plus filters were also designed for easy maintenance and long-term reliability. So you can count on them to keep your pool’s water clean and crystal clear for years to come.

• Curved vertical grids provide maximum filter surface area for greater dirt-trapping capacity and

longer periods between cleanings.

• Internal design ensures optimum filtration and backwashing efficiency.

• Chemical resistant, fiberglass-reinforced polypropylene tank for exceptional strength and longer


• Easily removable filter grid pack to simplify maintenance and save you time.

Need more help? We would love to help you choose the right filtration system.

To speak with someone about pool filtration, please call 610-889-0711.

Or click the button below for a quote or to have us call you.